Start of Content Area

Procedure documentation Swapping Columns  Locate the document in its SAP Library structure

Use

You can change the sequence of the columns in the list.

Fixed Columns

A list can contain fixed columns. This means that these columns are located to the right or left of the list, depending on the settings. You cannot change the position of fixed columns. If horizontal paginators are visible, you can use them to scroll only those columns that are not fixed.

Prerequisites

      The Column Selection tab page is displayed in the Settings dialog box.

      The column you want to move is not a hierarchy column.

      The column you want to move is not a fixed column.

Procedure

...

...

       1.      To change the sequence of columns, open the Settings dialog box (see Using the Dialog Box with Settings for the List).

       2.      Choose the Column Selection tab page as required.

The Displayed Columns list contains all columns that are currently displayed in the list.

       3.      In the Displayed Columns list, select the entry with the column whose position you want to change.

Note

You can also select multiple entries in the list (see Selecting and Deselecting Rows) and then change their position.

       4.       Choose one of the following pushbuttons below the Displayed Columns list.

Changing the Column Sequence

To...

Choose

Move the column forward one position

This graphic is explained in the accompanying text with the quick info text Move Selected Columns Up

Move the column back one position

This graphic is explained in the accompanying text with the quick info text Move Selected Columns Down

Move the column to the beginning of the list

This graphic is explained in the accompanying text with the quick info text Move Selected Columns to Beginning

Move the column to the end of the list

This graphic is explained in the accompanying text with the quick info text Move Selected Columns to End

       5.      Apply your settings to the list.

 

End of Content Area